Pressure Input Modules
Model: AS11900G-03
Pressure Input Modules
Model: AS11900G-03
Overview
Pressure Input Module, 15 pin D-Sub Connector, 4 Channel
Technical Specs
Type
Pressure Input Module
ADC Native Resolution
14-bit
AI latency and repeatability
Response Time: 300µsec ±10%
Number of Inputs
4, Single Ended (1 for each pressure signal input)
Power Consumption
24 V Core: 3.5 W, 24 V IO: Maximum 120 W (When all 4 pressure devices consume 0.8Amp Maximum each from ±15 V power supply)
Anti-alias HW Filtering
200Hz ±20%, 6dB/octave minimum
Connector
15 pin D-sub
Maximum Current Delivery per connector
0.8 Amps
Input Voltage
24 VDC
Maximum error over full range
±0.15% of Full Scale (20°C to 30°C)
Minimum Input Impedance
1 Meg-ohm
MTBF
10 years at 80% confidence level
Protection
ESD to IEC 61000-4-2 ±4 kV contact,
Sampling Rate
6.25 kHz (160µsec, for all 4 channels) short to 24 V, +15 V, or -15 V
Operating Temperature
0 - 40°C, with 2°C upper limit reduction per 1000 ft above sea level. Note: At 40°C ambient, power consumption of the ±15V power supply should be limited to 100W (3.3A @ both ±15V) The pressure module should be located as the last module (right-most module in a stack)
Storage Temperature
-40 - 75°C
Altitude
up to 2000 meters
Humidity
5 - 95% non-condensing
Dimensions
52.5 x 125 x 92.3 mm
Mounting
DIN rail
Technical Specs
Type
Pressure Input Module
ADC Native Resolution
14-bit
AI latency and repeatability
Response Time: 300µsec ±10%
Number of Inputs
4, Single Ended (1 for each pressure signal input)
Power Consumption
24 V Core: 3.5 W, 24 V IO: Maximum 120 W (When all 4 pressure devices consume 0.8Amp Maximum each from ±15 V power supply)
Anti-alias HW Filtering
200Hz ±20%, 6dB/octave minimum
Connector
15 pin D-sub
Maximum Current Delivery per connector
0.8 Amps
Input Voltage
24 VDC
Maximum error over full range
±0.15% of Full Scale (20°C to 30°C)
Minimum Input Impedance
1 Meg-ohm
MTBF
10 years at 80% confidence level
Protection
ESD to IEC 61000-4-2 ±4 kV contact,
Sampling Rate
6.25 kHz (160µsec, for all 4 channels) short to 24 V, +15 V, or -15 V
Operating Temperature
0 - 40°C, with 2°C upper limit reduction per 1000 ft above sea level. Note: At 40°C ambient, power consumption of the ±15V power supply should be limited to 100W (3.3A @ both ±15V) The pressure module should be located as the last module (right-most module in a stack)
Storage Temperature
-40 - 75°C
Altitude
up to 2000 meters
Humidity
5 - 95% non-condensing
Dimensions
52.5 x 125 x 92.3 mm
Mounting
DIN rail
