CompactPCI Analog I/O Cards
Model: AS00700-02
CompactPCI Analog I/O Cards
Model: AS00700-02
Overview
Overview
The AS00700-02 Analog Input/Output Card is a general-purpose data acquisition control card containing 32 single ended analog inputs and 16 analog outputs. The I/O and power signals are distributed through J2 rear connector. The board form factor, physical dimensions and BUS interface comply with CompactPCI (cPCI) Specification PICMG® 2.0 R2.1.
Technical Specs
- TypeAnalog I/O Card
- BusCompact PCI, 32 bit (16 bit data transfer) 33MHz
- Outputs16
- Inputs32
- Plug and PlaySupports auto-recognition of board on power-on and plug-in, includes Device ID, Vendor ID, and configuration
- Power RequirementsDigital Section: +3.3 VDC @ 20 mA, +5 VDC @ 1.36 mA from J1, I/O Section: ±15 VDC @ 200 mA max generated from on-board 6 W DC/DC
- Form FactorPlug in Eurocard, 3U Height, 8 HP Width (1 slot), IEEE (1101.1, 101.10 and P1101.11)
- Front Panel Dimension128.5 x 20.32 x 2.5 mm (height x depth x thick)
- PCB Dimensions100 x 160 x 1.6 mm (3.9370 x 6.29920.0629 in.) (height x depth x thick)
- Rear ConnectorsMetric 2.0mm grid, female connector type A is used for J1 (cPCI BUS) and J2 (Signal distribution)
- Front Panel Indicators3.3V, 5V, -15V, +15V, HB, BIT
- IO Protection2A fuse on each output driver
- Operating Temperature0 - 70°C
- Storage Temperature-40 - 85°C
- Humidity5 - 95% non-condensing
- Weight200 g (0.44 lb)
Technical Specs
- TypeAnalog I/O Card
- BusCompact PCI, 32 bit (16 bit data transfer) 33MHz
- Outputs16
- Inputs32
- Plug and PlaySupports auto-recognition of board on power-on and plug-in, includes Device ID, Vendor ID, and configuration
- Power RequirementsDigital Section: +3.3 VDC @ 20 mA, +5 VDC @ 1.36 mA from J1, I/O Section: ±15 VDC @ 200 mA max generated from on-board 6 W DC/DC
- Form FactorPlug in Eurocard, 3U Height, 8 HP Width (1 slot), IEEE (1101.1, 101.10 and P1101.11)
- Front Panel Dimension128.5 x 20.32 x 2.5 mm (height x depth x thick)
- PCB Dimensions100 x 160 x 1.6 mm (3.9370 x 6.29920.0629 in.) (height x depth x thick)
- Rear ConnectorsMetric 2.0mm grid, female connector type A is used for J1 (cPCI BUS) and J2 (Signal distribution)
- Front Panel Indicators3.3V, 5V, -15V, +15V, HB, BIT
- IO Protection2A fuse on each output driver
- Operating Temperature0 - 70°C
- Storage Temperature-40 - 85°C
- Humidity5 - 95% non-condensing
- Weight200 g (0.44 lb)