CompactPCI Serial Communication Cards

Model: AS00800-01

$610

Compare

Type
Serial Card
Bus
Compact PCI, 32 bit (16 bit data transfer) 33MHz
Channels
4
Maximum Data Rate
120 Kbps
Plug and Play
Supports auto-recognition of board on power-on and plug-in, includes Device ID, Vendor ID, and configuration
Power Requirements
Digital Section: +5 VDC @ 800 mA from J1, I/O Section: +5 VDC @ 300 mA generated on board by DC/DC (1.5 W)
Form Factor
Plug in Eurocard, 3U Height, 8 HP Width (1 slot), IEEE (1101.1, 101.10 and P1101.11)
Front Panel Dimension
128.5 x 20.32 x 2.5 mm (height x depth x thick)
PCB Dimensions
100 x 160 x 1.6 mm (3.9370 x 6.2992 x 0.0629 in.) (height x depth x thick)

Rear Connectors
Metric 2.0mm grid, female connector type A is used for J1 (cPCI BUS) and J2 (Signal distribution).
Front Panel Indicators
5V Bus, 5V Isolated, Tx and Rx for each channel
Isolation
Opto-isolation, Min 1500V
Voltage
TTL
Current
±20 mA
Operating Temperature
0 - 70°C
Storage Temperature
-40 - 85°C
Humidity
5 - 95% non-condensing
Weight
200 g (0.44 lb)

Type
Serial Card
Bus
Compact PCI, 32 bit (16 bit data transfer) 33MHz
Channels
4
Maximum Data Rate
120 Kbps
Plug and Play
Supports auto-recognition of board on power-on and plug-in, includes Device ID, Vendor ID, and configuration
Power Requirements
Digital Section: +5 VDC @ 800 mA from J1, I/O Section: +5 VDC @ 300 mA generated on board by DC/DC (1.5 W)
Form Factor
Plug in Eurocard, 3U Height, 8 HP Width (1 slot), IEEE (1101.1, 101.10 and P1101.11)
Front Panel Dimension
128.5 x 20.32 x 2.5 mm (height x depth x thick)
PCB Dimensions
100 x 160 x 1.6 mm (3.9370 x 6.2992 x 0.0629 in.) (height x depth x thick)

Rear Connectors
Metric 2.0mm grid, female connector type A is used for J1 (cPCI BUS) and J2 (Signal distribution).
Front Panel Indicators
5V Bus, 5V Isolated, Tx and Rx for each channel
Isolation
Opto-isolation, Min 1500V
Voltage
TTL
Current
±20 mA
Operating Temperature
0 - 70°C
Storage Temperature
-40 - 85°C
Humidity
5 - 95% non-condensing
Weight
200 g (0.44 lb)

Contact an Applications Specialist by sending us an email