Pulse Width Modulating Slice Modules
Model: AS11893G-41
Pulse Width Modulating Slice Modules
Model: AS11893G-41
Overview
Pulse Width Modulating Slice Module
Technical Specs
Type
Pulse Width Modulating Slice Module
Number of Inputs
12
Output
Open collector sink/source
Number of Outputs
12
Power Consumption
@ 200mA = 24 V_IO@ 2.5 Amp, 24 V_CORE@ 0.15 Amp (per module) Assuming all DOs are loaded
Connector
Terminal
Input Isolation
2.5 kVrms
DI refresh rate
2.7 µSec
Debounce Filter
fixed to 4 cycles of DI Refresh Rate (10.8 µSec)
Logic Level
24 VDC (8 - 30 VDC)
Maximum update rate
25 µSec
Output Resolution
0.01% Full Scale power
Protection
ESD to IEC 61000-4-2 ±4 kV contact, short to +24 VDC, 24 V inductive load switching (each channel)
Pull Up/Down Value
22K
Sink Input Logic Level
24 VDC ±5%
Sink Input Nominal Load Impedance
6 kOhm
Sink Input Current, Maximum OFF
2.25 mA (10.7v )
Sink Input Current, Minimum ON
3.3 mA (4.5v)
Sink Input Current, Maximum ON
4.7 mA
Sink Output Maximum thermal current limit (ON)
2 A per bank of 6
Sink Output Maximum Leakage Current (OFF)
0.1 mA (output tied to 24 v)
Sink Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Sink Output Output Low Voltage (ON)
Maximum 1.1 v @ 200 mA
Source Input Logic level
24 V
Source Input Input Low Voltage Range ON
15 v (2.5 mA)
Source Input High Voltage Range OFF
12.8 v (2.15mA)
Source Input Input Current, Maximum ON
4.7 mA
Source Input Nominal Load Impedance
6 kOhm
Source Output Maximum Thermal Current Limit (ON)
2 A per bank of 6
Source Output Maximum Leakage Current (OFF)
0.1 mA (output tied to Ground)
Source Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Source Output Output High Voltage
Minimum 23.7 V @ 200 mA
Source Output Maximum Inductive Load Energy, 1Hz Cycled
60 mJ
Source Output Minimum Available Current Source (ON)
200 mA
Operational Environment Temperature
0 to 55 °C, with 2 °C upper limit reduction per 1000 ft above sea level
Storage Temperature
-40 - 85°C
Altitude
up to 2000 meters
Humidity
5 - 85% non-condensing
Dimensions
35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 in.)
Mounting
DIN rail
Technical Specs
Type
Pulse Width Modulating Slice Module
Number of Inputs
12
Output
Open collector sink/source
Number of Outputs
12
Power Consumption
@ 200mA = 24 V_IO@ 2.5 Amp, 24 V_CORE@ 0.15 Amp (per module) Assuming all DOs are loaded
Connector
Terminal
Input Isolation
2.5 kVrms
DI refresh rate
2.7 µSec
Debounce Filter
fixed to 4 cycles of DI Refresh Rate (10.8 µSec)
Logic Level
24 VDC (8 - 30 VDC)
Maximum update rate
25 µSec
Output Resolution
0.01% Full Scale power
Protection
ESD to IEC 61000-4-2 ±4 kV contact, short to +24 VDC, 24 V inductive load switching (each channel)
Pull Up/Down Value
22K
Sink Input Logic Level
24 VDC ±5%
Sink Input Nominal Load Impedance
6 kOhm
Sink Input Current, Maximum OFF
2.25 mA (10.7v )
Sink Input Current, Minimum ON
3.3 mA (4.5v)
Sink Input Current, Maximum ON
4.7 mA
Sink Output Maximum thermal current limit (ON)
2 A per bank of 6
Sink Output Maximum Leakage Current (OFF)
0.1 mA (output tied to 24 v)
Sink Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Sink Output Output Low Voltage (ON)
Maximum 1.1 v @ 200 mA
Source Input Logic level
24 V
Source Input Input Low Voltage Range ON
15 v (2.5 mA)
Source Input High Voltage Range OFF
12.8 v (2.15mA)
Source Input Input Current, Maximum ON
4.7 mA
Source Input Nominal Load Impedance
6 kOhm
Source Output Maximum Thermal Current Limit (ON)
2 A per bank of 6
Source Output Maximum Leakage Current (OFF)
0.1 mA (output tied to Ground)
Source Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Source Output Output High Voltage
Minimum 23.7 V @ 200 mA
Source Output Maximum Inductive Load Energy, 1Hz Cycled
60 mJ
Source Output Minimum Available Current Source (ON)
200 mA
Operational Environment Temperature
0 to 55 °C, with 2 °C upper limit reduction per 1000 ft above sea level
Storage Temperature
-40 - 85°C
Altitude
up to 2000 meters
Humidity
5 - 85% non-condensing
Dimensions
35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 in.)
Mounting
DIN rail
