Specifications

  • Type
    Pressure Input Module
  • ADC Native Resolution
    14-bit
  • AI latency and repeatability
    Response Time: 300µsec ±10%
  • Number of Inputs
    4, Single Ended (1 for each pressure signal input)
  • Power Consumption
    24 V Core: 3.5 W, 24 V IO: Maximum 120 W (When all 4 pressure devices consume 0.8Amp Maximum each from ±15 V power supply)
  • Anti-alias HW Filtering
    200Hz ±20%, 6dB/octave minimum
  • Connector
    15 pin D-sub
  • Maximum Current Delivery per connector
    0.8 Amps
  • Input Voltage
    24 VDC
  • Maximum error over full range
    ±0.15% of Full Scale (20°C to 30°C)
  • Minimum Input CMRR
    50 dB, 0-1 kHz
  • Minimum Input Impedance
    1 Meg-ohm
  • MTBF
    10 years at 80% confidence level
  • Protection
    ESD to IEC 61000-4-2 ±4 kV contact,
  • Sampling Rate
    6.25 kHz (160µsec, for all 4 channels) short to 24 V, +15 V, or -15 V
  • Operating Temperature
    0 - 40°C, with 2°C upper limit reduction per 1000 ft above sea level. Note: At 40°C ambient, power consumption of the ±15V power supply should be limited to 100W (3.3A @ both ±15V) The pressure module should be located as the last module (right-most module in a stack)
  • Storage Temperature
    -40 - 75°C
  • Altitude
    up to 2000 meters
  • Humidity
    5 - 95% non-condensing
  • Dimensions
    52.5 x 125 x 92.3 mm
  • Mounting
    DIN rail

Need help?

Contact an Applications Specialist by sending us an email