910-52034 Vacuum Transducer

Absolute Measurement Range

1.0 x 10^-5 to 1500 Torr
Digital Communication

RS485
Type

Vacuum Transducer
Sensor

MicroPirani (MEMS Thermal Conductivity), Piezo absolute (MEMS diaphragm)
Display

Touch-screen Display
Seal Material

Viton
Enclosure

Standard
Electrical Connector

15-pin, High Density, D-sub male
Interface

RS485/analog
Relays

3
Fitting Type

8 VCR female
Installation Orientation

Any
Set Point Range

5.0 x 10^-4 - 1500 Torr, Absolute
Calibration Gas

Air, Argon, Helium, Nitrogen, H2, H2O vapor, CO2, Xenon, Neon, Gas independent above 11 Torr
Operating Temperature

0 - 40°C (32 - 104°F)

Maximum Bakeout Temperature

85°C (185°F)
Digital Controls

Zero adjust, span adjust, analog output, pressure units, baud rate, address, factory default, set point functions: value, hysteresis, direction, enable, transducer status, switch, LED test
Digital Status

Pressure reading, units, set point, operating time, transducer temperature, user tag, model, device type, serial number, firmware and hardware versions, part number, manufacturer
Analog Output

1-9.2 VDC, (1 VDC per Decade)
Analog Output Resolution

16 bit
Relay Contact Rating

1 Amp @ 30 VAC/DC, resistive
Relay Response

100 msec maximum
Power Requirements

9 - 30 VDC, <1.2 Watts maximum
Accuracy

5 x 10^-4 to 1 x 10^-3 Torr ±10% of Reading, 1 x 10^-3 to 11 Torr ±5% of Reading, 11 - 1000 Torr ±0.75% of Reading
Repeatability

5 x 10^-4 to 10^-3 Torr ±8% of Reading, 10^-3 Torr to 11 Torr ±2% of Reading, 11 - 1000 Torr ±0.2% of Reading
Overpressure Limit

2250 Torr (absolute)
Exposed Materials

Silicon, SiO2, Si3N4, gold, low outgassing epoxy resin, 304 stainless steel, Viton
Electronic Casing and Flange

304 stainless steel
Compliance

CE
Digital Baud Rates

4800 - 230400 Baud

Contact an Applications Specialist by sending us an email