Pulse Width Modulating Slice Modules
Model: AS11893G-41
Pulse Width Modulating Slice Modules
Model: AS11893G-41
Overview
Overview
The AS11893G-41 Pulse Width Modulating Slice for Interfacing with Solid State Relays (SSR's) Module is a compact and high density solution for integrating Pulse Width Modulating outputs with the MKS Automation Platform PAC or CM modules, or with the MultiTherm™ 2000. Each PWM module supports 12 digital inputs and 12 PWM outputs. PWM outputs are typically used in temperature control applications, where the Pulse Width Modulating output interfaces to a Solid State Relay (SSR), which is driving a heater.
Technical Specs
- TypePulse Width Modulating Slice Module
- Number of Inputs12
- OutputOpen collector sink/source
- Number of Outputs12
- Power Consumption@ 200mA = 24 V_IO@ 2.5 Amp, 24 V_CORE@ 0.15 Amp (per module) Assuming all DOs are loaded
- ConnectorTerminal
- Input Isolation2.5 kVrms
- DI refresh rate2.7 µSec
- Debounce Filterfixed to 4 cycles of DI Refresh Rate (10.8 µSec)
- Logic Level24 VDC (8 - 30 VDC)
- Maximum update rate25 µSec
- Output Resolution0.01% Full Scale power
- ProtectionESD to IEC 61000-4-2 ±4 kV contact, short to +24 VDC, 24 V inductive load switching (each channel)
- Pull Up/Down Value22K
- Sink Input Logic Level24 VDC ±5%
- Sink Input Nominal Load Impedance6 kOhm
- Sink Input Current, Maximum OFF2.25 mA (10.7v )
- Sink Input Current, Minimum ON3.3 mA (4.5v)
- Sink Input Current, Maximum ON4.7 mA
- Sink Output Maximum thermal current limit (ON)2 A per bank of 6
- Sink Output Minimum Available Current Sink (ON)200 mA
- Sink Output Maximum Leakage Current (OFF)0.1 mA (output tied to 24 v)
- Sink Output Minimum Thermal Current Limit (ON)1 A per bank of 6
- Sink Output Output Low Voltage (ON)Maximum 1.1 v @ 200 mA
- Source Input Logic level24 V
- Source Input Input Low Voltage Range ON15 v (2.5 mA)
- Source Input High Voltage Range OFF12.8 v (2.15mA)
- Source Input Input Current, Maximum ON4.7 mA
- Source Input Nominal Load Impedance6 kOhm
- Source Output Maximum Thermal Current Limit (ON)2 A per bank of 6
- Source Output Maximum Leakage Current (OFF)0.1 mA (output tied to Ground)
- Source Output Minimum Thermal Current Limit (ON)1 A per bank of 6
- Source Output Output High VoltageMinimum 23.7 V @ 200 mA
- Source Output Maximum Inductive Load Energy, 1Hz Cycled60 mJ
- Source Output Minimum Available Current Source (ON)200 mA
- Operational Environment Temperature0 to 55 °C, with 2 °C upper limit reduction per 1000 ft above sea level
- Storage Temperature-40 - 85°C
- Altitudeup to 2000 meters
- Humidity5 - 85% non-condensing
- Dimensions35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 in.)
- MountingDIN rail
Technical Specs
- TypePulse Width Modulating Slice Module
- Number of Inputs12
- OutputOpen collector sink/source
- Number of Outputs12
- Power Consumption@ 200mA = 24 V_IO@ 2.5 Amp, 24 V_CORE@ 0.15 Amp (per module) Assuming all DOs are loaded
- ConnectorTerminal
- Input Isolation2.5 kVrms
- DI refresh rate2.7 µSec
- Debounce Filterfixed to 4 cycles of DI Refresh Rate (10.8 µSec)
- Logic Level24 VDC (8 - 30 VDC)
- Maximum update rate25 µSec
- Output Resolution0.01% Full Scale power
- ProtectionESD to IEC 61000-4-2 ±4 kV contact, short to +24 VDC, 24 V inductive load switching (each channel)
- Pull Up/Down Value22K
- Sink Input Logic Level24 VDC ±5%
- Sink Input Nominal Load Impedance6 kOhm
- Sink Input Current, Maximum OFF2.25 mA (10.7v )
- Sink Input Current, Minimum ON3.3 mA (4.5v)
- Sink Input Current, Maximum ON4.7 mA
- Sink Output Maximum thermal current limit (ON)2 A per bank of 6
- Sink Output Minimum Available Current Sink (ON)200 mA
- Sink Output Maximum Leakage Current (OFF)0.1 mA (output tied to 24 v)
- Sink Output Minimum Thermal Current Limit (ON)1 A per bank of 6
- Sink Output Output Low Voltage (ON)Maximum 1.1 v @ 200 mA
- Source Input Logic level24 V
- Source Input Input Low Voltage Range ON15 v (2.5 mA)
- Source Input High Voltage Range OFF12.8 v (2.15mA)
- Source Input Input Current, Maximum ON4.7 mA
- Source Input Nominal Load Impedance6 kOhm
- Source Output Maximum Thermal Current Limit (ON)2 A per bank of 6
- Source Output Maximum Leakage Current (OFF)0.1 mA (output tied to Ground)
- Source Output Minimum Thermal Current Limit (ON)1 A per bank of 6
- Source Output Output High VoltageMinimum 23.7 V @ 200 mA
- Source Output Maximum Inductive Load Energy, 1Hz Cycled60 mJ
- Source Output Minimum Available Current Source (ON)200 mA
- Operational Environment Temperature0 to 55 °C, with 2 °C upper limit reduction per 1000 ft above sea level
- Storage Temperature-40 - 85°C
- Altitudeup to 2000 meters
- Humidity5 - 85% non-condensing
- Dimensions35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 in.)
- MountingDIN rail